Advertisement

Download Resetter Canon Pixma MX366 MX360

Download Resetter Canon Pixma MX366 MX360

Download Resetter Canon Pixma MX366 MX360

 

Download Resetter Canon Pixma MX366 MX360Canon MX 360 / MX 366 is a Multi-Function printer accompanied by Fax, so in addition to print, scan (scan), can also be used as a means of sending and receiving faxes. But here I was not going to discuss more about the features of this product, but I will share my experiences about the damage (error) which is prone to happen on the printer.

Canon MX 360 / MX 366 has an opportunity to experience an error with the code “5B00“. If this happens, then the actions to be taken are as follows:

Setting Printer to Service Mode:

  • Make sure the printer is turned off and electricity installed (plug connected to the power supply);
  • Press the STOP button and hold a few seconds, then press the ON button (Power);
  • While pressing the ON button, press the STOP button 5 times;
  • Release both buttons simultaneously;
  • Led will blink for a while and then will flash GREEN;
  • The PC will detect a new hardware, and you can to ignore it.

Furthermore, the application prepared resetter for Canon MX 360 / MX 366. If you do not have can be downloaded here.

Extract Files Resetter Canon MX 360 just downloaded;

  • Prepare two (2) pieces of paper in the printer (for printing requirements during the reset process)
    Run the program resetter Canon MX 360, the display window as follows.
  • Click “PLAY”, then the printer will proceed, then the Canon MX 360 will print a page with the words “D = 000.0”
  • Click “EEPROM”, and the printer will print the results Resetter Canon MX 360 / MX 366. One row is as follows:
  • Turn off the printer by pressing the POWER (ON)
    Try performing the Test Print, this is the result when the printer is back to normal
  • It’S Done

Thus the procedure Resetting Printer Canon MX 360 / MX 366 using software.
Hope it is useful!

Download Resetter Canon Pixma MX366 MX360

Download
Category
Windows

Previous post:

Next post: